Redes de Polietileno tratado, resistencia UV, con un trenzado de 1 mm y 1,2 mm, de alta durabilidad. Nota: la durabilidad en una red a la intemperie depende de la orientación y la solarización geográfica, (y una correcta sujeción por supuesto), a título de ejemplo, en la zona de Granada suelen superar los 4 años, en Madrid entre 5 y 6 años, en Santander suelen aguantar 10 años. Bajo techo superan los 10 años sin problemas.
Formato: Solemos tener stock para formato estándar, en metros, múltiplos de 5, : 5x5 metros 5x10 , 5x15 , 5x20 , 10x10 , 15x15 metros
A medida en blanco y negro fabricamos cualquier medida rectangular (no triangular u otros polígonos.
El ojo de la red antipaloma y antigaviota es de 50mm, antipájaro 25mm antigorriones y vencejos 19mm, anudadas todas, no se deshilachan al corte.
Colores blanco, negro, y arena (color piedra)
Tenemos accesorios para instalación, consultar. 6620 11 111
Polyethylene VS4530 High Density Polyethylene for Monofilaments Description VS4530 is a high density polyethylene grade suitable for monofilament production. Applications Monofilaments produced from VS4530 are suitable for applications like nets, ropes, straps and brushes. VS4530 is designed to achieve optimal mechanical properties. Typical yarn count is 500-1200 denier ( 0.27- 0.42 mm). Physical Properties Typical Value* Unit Test Method Density 953 kg/m3 ISO 1183D/ISO 1872-2B Melt Flow Rate (190º/2.16kg) 0.5 g/10 min ISO 1133 ·data should not be used for specification work Processing Guidelines Temperatures: Extrusion: 2010-210-260-270-260ºC Cooling bath: 20- 40ºC Stretching bath: 90-100ºC Stretching: Ratio: 8 – 11 Rate: 80 – 200m/min Depending on the processing conditions, the following characteristics can be obtained: Tenacity: 5.5 – 7.0 g/den Elongation: 15 – 30% Storage and handling VS4530 should be stored in dry conditions at temperatures below 50ºC and protected from UV light. Improper storage can initiate degradation, which results in odour generation and colour changes and can have negative effects on the physical properties of the product. Dust and fines from the product carry a risk of dust explosion. All equipment should be properly earthed. Inhalation of dust should be avoided as it may cause irritation of the respiratory system. Small amount of fumes are generated during processing of the product. Proper ventilation is therefore required. Recycling The product is suitable for recycling using modern methods of shredding and cleaning. In-house production waste should be kept clean to facilitate direct recycling. A Safety Data Sheet is available on request, and representative for more details on various aspect of safety, recovery and disposal of the product. Related Documents The following related documents are available on request, and represent various aspects on the usability, safety, recovery and disposal of the product. Recovery and Disposal of Polyolefins Information on Emissions from Processing and Fires Environmental Fact Sheet Liability Statements on: - Compliance to Food Contact Regulations - Heavy metals - Toys Regulations
